Red Hat Ceph Storage for OpenStack – CL260 — Lesson 4: Monitoring, Expansion, Performance, Troubleshooting, Backup, and Recovery

Learning Objectives

• Operate, diagnose, document, recover, and improve health monitoring, capacity expansion, and performance.
• Apply troubleshooting and backup and recovery while preserving reviewable technical evidence.
• Recognize and correct the condition where the technical result is restored but monitoring, rollback, evidence, ownership, or handover remains incomplete.

Detailed Topics

• health monitoring: apply the concept to the course scenario, identify dependencies and controls, and record objective evidence of the result.
• capacity expansion: apply the concept to the course scenario, identify dependencies and controls, and record objective evidence of the result.
• performance: apply the concept to the course scenario, identify dependencies and controls, and record objective evidence of the result.
• troubleshooting: apply the concept to the course scenario, identify dependencies and controls, and record objective evidence of the result.
• backup and recovery: apply the concept to the course scenario, identify dependencies and controls, and record objective evidence of the result.

Instructor Demonstration

The instructor demonstrates monitoring, expansion, performance, troubleshooting, backup, and recovery by tracing architecture, commands, configuration, system messages, and evidence. The walkthrough tests how the technical result is restored but monitoring, rollback, evidence, ownership, or handover remains incomplete and explains how to isolate the cause without masking related issues.

Hands-On Exercise

Conduct an operational acceptance review for Monitoring, Expansion, Performance, Troubleshooting, Backup, and Recovery and add the verified result to the Ceph cluster build record, OpenStack integration design, health evidence, capacity plan, and recovery runbook.

1. Confirm scope, versions, access, dependencies, assumptions, and acceptance criteria.
2. Perform the workflow while recording commands, configuration, output, events, and decisions.
3. Test the normal path and one course-specific exception or boundary condition.
4. Retest the correction and document rollback, ownership, and follow-up actions.

Scenario Analysis

• Identify which dependency most strongly influences health monitoring in the stated scenario.
• Compare two approaches for troubleshooting and explain the security, reliability, performance, and support trade-offs.
• Decide what evidence must be retained in the Ceph cluster build record, OpenStack integration design, health evidence, capacity plan, and recovery runbook before operational acceptance.

Troubleshooting Guidance

Begin with the first observable difference from the expected result. Check monitoring, troubleshooting, rollback, ownership, evidence, and handover separately, then correlate logs, events, commands, metrics, and configuration history. Treat the assumption that the technical result is restored but monitoring, rollback, evidence, ownership, or handover remains incomplete as a hypothesis until a reproducible retest confirms the cause.

Validation Checklist

• The required monitoring, troubleshooting, rollback, ownership, evidence, and handover were checked and recorded.
• The normal path and a course-specific exception were tested.
• The Ceph cluster build record, OpenStack integration design, health evidence, capacity plan, and recovery runbook links conclusions to commands, configuration, logs, metrics, or other objective evidence.
• Corrective actions, rollback, ownership, and handover notes are complete.

Lesson Outcome

Learners can apply Monitoring, Expansion, Performance, Troubleshooting, Backup, and Recovery, explain the observed platform behavior, and support the result with a reviewable Ceph cluster build record, OpenStack integration design, health evidence, capacity plan, and recovery runbook.